{
  "schemaVersion": "1.0",
  "module": "FB",
  "contentVersion": "legacy-e619f6b1db68",
  "supportLevel": "legacy-bootstrap",
  "title": {
    "de": "FB",
    "en": "FB - FB-e"
  },
  "summary": {
    "de": "Bestehende LVS-Modulhilfe. Variablen und Bedienregeln müssen vor Änderungen mit dem aktuellen MCP-Laufzeitzustand abgeglichen werden.",
    "en": "Existing LVS module help. Variables and operating rules must be reconciled with current MCP runtime state before making changes."
  },
  "humanHelp": {
    "de": "/output/FB/index_de.html",
    "en": "/output/FB/index_en.html"
  },
  "knowledgeBase": null,
  "helpTopics": [
    {
      "language": "en",
      "title": "FB - FB-e",
      "url": "/output/FB/FB-e_en.html",
      "excerpt": "FB - FB-e DE FB FB-e Contents FB-e On this page eReference Springer Verlag Table 1 - Cast iron radiators; T m = 80°C and T a = 20°C, H height; D depth; L length Table 2 - Steel radiators; T m = 80°C and T a = 20°C Table 3 - Tubular steel radiators; T m = 80°C and T a = 20°C. Diameter of tubes 25 mm. Length of section 46 mm Table 4 - Column radiators with ΔT = 60 K Table 5 - Fold radiators with ΔT = 60 K. Length of section 30 mm Table 6 - Panel radiators with ΔT = 60 K. Smooth walls, panels of 25 ± 3 mm thickness, and ≥ 35 mm(internal) width (without cover grill) Table 7 - Panel radiators with ΔT = 60 K. Vertically profiled; panels of 18 ± 3 mm thickness. Developed length of profiles at least 10% longer than the length of the panels; height of profiles ≥ total height − 100 mm (without cover grill); (internal width) ≥ 35 mm Table 8 - Panel radiators; vertically profiled; sheet-metal convector (SMC) welded onto corrugations; panels of 18 mm thickness (without cover grill); ΔT = 60 K Table 9 – Panel radiators; vertically profiled; sheet-metal convector (SMC) welded onto water channels; panels of 15 mm thickness (without cover grill); ΔT = 60 K Table 10 - Horizontal tubular steel radiators with smooth walls; ΔT = 60 K Table 11 - Finned-tube convectors of 70 mm height. Single bank with shaft of SH mm height. ΔT = 60 K Table 12 - Finned-tube convectors of 160 mm height. Two banks with shaft of SH mm height. ΔT = 60 K Table 13 - Radiant ceiling heating panel installed at a height of "
    },
    {
      "language": "de",
      "title": "FB",
      "url": "/output/FB/FB_de.html",
      "excerpt": "FB EN FB Navigation FB Auf dieser Seite eReference Springer Verlag Tabelle 1 - Gussradiatoren nach DIN 4703, Teil 1, mit Tm = 80°C und TL = 20°C (Bauhöhe BH, Bautiefe BT) Tabelle 2 - Stahlradiatoren nach DIN 4703, Teil 1, mit Tm = 80°C und TL = 20°C Tabelle 3 - Stahlrohrradiatoren nach DIN 4703, Teil 1, mit Tm = 80°C und TL = 20°C; Rohrdurchmesser 25 mm, Gliedbaulänge 46 mm Tabelle 4 - Schmalsäulenradiatoren (Beispiel) mit ΔT = 60 K Tabelle 5 - Faltenradiatoren (Beispiel) mit ΔT = 60 K; Sektionslänge 30 mm Tabelle 6 - Plattenheizkörper nach DIN 4703, Teil 1, ΔT = 60 K; glattwandig, Plattendicke (25 ± 3) mm, lichter Abstand ≥35 mm (ohne Abdeckgitter) Tabelle 7 - Plattenheizkörper nach DIN 4703, Teil 1, ΔT = 60 K; vertikal profiliert, Plattendicke (18 ± 3) mm, Profilabwicklung mindestens 10% größer als Plattenlänge, Profilhöhe ≥ Bauhöhe minus 100 mm (ohne Abdeckgitter), lichter Abstand ≥35 mm Tabelle 8 - Plattenheizkörper (Beispiel), vertikal profiliert, mit auf Sicken geschweißten Konvektionsblechen (KB), Plattendicke 18 mm (ohne Abdeckgitter), ΔT = 60 K Tabelle 9 – Plattenheizkörper (Beispiel), vertikal profiliert, mit auf wasserführenden Kanälen geschweißten Konvektionsblechen (KB), Plattendicke 15 mm (ohne Abdeckgitter), ΔT = 60 K Tabelle 10 - Rohrheizkörper (nach DIN 4703, Ausg. April 1944 zurückgezogen), glattwandig, waagerecht, ΔT = 60 K Tabelle 11 - Rippenrohrkonvektoren (Beispiel), Bauhöhe 70 mm, einlagig, mit Schacht (Schachthöhe SH), ΔT = 60 K Tabelle 12 - Rippenrohr"
    }
  ],
  "variables": [],
  "mcp": {
    "readBeforeUse": true,
    "workflow": [
      "Read this context and the human module help.",
      "Inspect the live module definition and current values through MCP.",
      "Resolve materials through the material workflow when material selectors are present.",
      "Set only runtime-confirmed input variables; never infer writable state from a legacy help filename.",
      "Calculate, inspect validation messages and read back governing results."
    ],
    "limitations": [
      "This bootstrap context preserves the complete legacy help but does not yet contain a curated semantic variable contract.",
      "Runtime MCP metadata is authoritative when it differs from this legacy snapshot."
    ]
  },
  "migration": {
    "curated": false,
    "target": "Create content/modules/<MODULE>/module.json and bilingual HTML fragments using B1 as the reference.",
    "sourceRepository": "lvs",
    "sourceCommit": "e619f6b1db68045fa49935d6f5f807b9acd1bc1d",
    "catalogConfigurations": [
      {
        "configId": "",
        "displayName": "F5",
        "designType": null,
        "defaultBauform": null
      }
    ]
  }
}