{
  "schemaVersion": "1.0",
  "module": "an3f",
  "contentVersion": "legacy-e619f6b1db68",
  "supportLevel": "legacy-bootstrap",
  "title": {
    "de": "an3f - an3f-e",
    "en": "an3f - an3f-e"
  },
  "summary": {
    "de": "Bestehende LVS-Modulhilfe. Variablen und Bedienregeln müssen vor Änderungen mit dem aktuellen MCP-Laufzeitzustand abgeglichen werden.",
    "en": "Existing LVS module help. Variables and operating rules must be reconciled with current MCP runtime state before making changes."
  },
  "humanHelp": {
    "de": "/output/an3f/index_de.html",
    "en": "/output/an3f/index_en.html"
  },
  "knowledgeBase": null,
  "helpTopics": [
    {
      "language": "en",
      "title": "an3f - an3f-e",
      "url": "/output/an3f/an3f-e_en.html",
      "excerpt": "an3f - an3f-e DE an3f an3f-e Contents an3f-e On this page Variable list Variable 11 – Fatigue-Strength-Reduction Factors Variable 12 – Parameter m Variable 13 – Parameter n an3f-e Variable list Variable 11 – Fatigue-Strength-Reduction Factors Table 5.11 - Weld Surface Fatigue-Strength-Reduction Factors Weld Condition Surface Condition Quality Levels (see Table 5.12) 1 2 3 4 5 6 7 Full penetration Machined 1.0 1.5 1.5 2.0 2.5 3.0 4.0 As-welded 1.2 1.6 1.7 2.0 2.5 3.0 4.0 Partial penetration Final surface machined NA 1.5 1.5 2.0 2.5 3.0 4.0 Final surface as-welded NA 1.6 1.7 2.0 2.5 3.0 4.0 Root NA NA NA NA NA NA 4.0 Fillet Toe machined NA NA 1.5 NA 2.5 3.0 4.0 Toe as-welded NA NA 1.7 NA 2.5 3.0 4.0 Root NA NA NA NA NA NA 4.0 Table 5.12 - Weld Surface Fatigue-Strength-Reduction Factors Fatigue-Strength-Reduction Factor Quality Level Definition 1.0 1 Machined or ground weld that receives a full volumetric examination, and a surface that receives MT/PT examination and a VT examination. 1.2 1 As-welded weld that receives a full volumetric examination, and a surface that receives MT/PT and VT examination 1.5 2 Machined or ground weld that receives a partial volumetric examination, and a surface that receives MT/PT examination and VT examination 1.6 2 As-welded weld that receives a partial volumetric examination, and a surface that receives MT/PT and VT examination 1.5 3 Machined or ground weld surface that receives MT/PT examination and a VT examination (visual), but the weld recei"
    },
    {
      "language": "en",
      "title": "an3f",
      "url": "/output/an3f/an3f_en.html",
      "excerpt": "an3f DE an3f Contents an3f On this page Variablenliste Variable 11 – Faktor zur Reduzierung der Dauerfestigkeit Variable 12 – Parameter m Variable 13 – Parameter n an3f Variablenliste Variable 11 – Faktor zur Reduzierung der Dauerfestigkeit Table 5.11 - Weld Surface Fatigue-Strength-Reduction Factors Weld Condition Surface Condition Quality Levels (see Table 5.12) 1 2 3 4 5 6 7 Full penetration Machined 1.0 1.5 1.5 2.0 2.5 3.0 4.0 As-welded 1.2 1.6 1.7 2.0 2.5 3.0 4.0 Partial penetration Final surface machined NA 1.5 1.5 2.0 2.5 3.0 4.0 Final surface as-welded NA 1.6 1.7 2.0 2.5 3.0 4.0 Root NA NA NA NA NA NA 4.0 Fillet Toe machined NA NA 1.5 NA 2.5 3.0 4.0 Toe as-welded NA NA 1.7 NA 2.5 3.0 4.0 Root NA NA NA NA NA NA 4.0 Table 5.12 - Weld Surface Fatigue-Strength-Reduction Factors Fatigue-Strength-Reduction Factor Quality Level Definition 1.0 1 Machined or ground weld that receives a full volumetric examination, and a surface that receives MT/PT examination and a VT examination. 1.2 1 As-welded weld that receives a full volumetric examination, and a surface that receives MT/PT and VT examination 1.5 2 Machined or ground weld that receives a partial volumetric examination, and a surface that receives MT/PT examination and VT examination 1.6 2 As-welded weld that receives a partial volumetric examination, and a surface that receives MT/PT and VT examination 1.5 3 Machined or ground weld surface that receives MT/PT examination and a VT examination (visual), but the weld receive"
    }
  ],
  "variables": [
    {
      "varNr": 11,
      "semanticStatus": "legacy-help-only",
      "label": {
        "de": "an3f - Variable 11 – Faktor zur Reduzierung der Dauerfestigkeit",
        "en": "an3f - Variable 11 – Fatigue-Strength-Reduction Factors"
      },
      "description": {
        "de": "an3f - Variable 11 – Faktor zur Reduzierung der Dauerfestigkeit an3f Variable 11 – Faktor zur Reduzierung der Dauerfestigkeit Navigation Engineering Your Best Variable 11 – Faktor zur Reduzierung der Dauerfestigkeit Variable 12 – Parameter m Variable 13 – Parameter n Variablenliste Engineering Your Best Variable 11 – Faktor zur Reduzierung der Dauerfestigkeit Variable 11 – Faktor zur Reduzierung der Dauerfestigkeit Table 5.11 - Weld Surface Fatigue-Strength-Reduction Factors Weld Condition Surface Condition Quality Levels (see Table 5.12) 1 2 3 4 5 6 7 Full penetration Machined 1.0 1.5 1.5 2.0 2.5 3.0 4.0 As-welded 1.2 1.6 1.7 2.0 2.5 3.0 4.0 Partial penetration Final surface machined NA 1.5 1.5 2.0 2.5 3.0 4.0 Final surface as-welded NA 1.6 1.7 2.0 2.5 3.0 4.0 Root NA NA NA NA NA NA 4.0 Fillet Toe machined NA NA 1.5 NA 2.5 3.0 4.0 Toe as-welded NA NA 1.7 NA 2.5 3.0 4.0 Root NA NA NA NA NA NA 4.0 Table 5.12 - Weld Surface Fatigue-Strength-Reduction Factors Fatigue-Strength-Reduction Factor Quality Level Definition 1.0 1 Machined or ground weld that receives a full volumetric examination, and a surface that receives MT/PT examination and a VT examination. 1.2 1 As-welded weld that r",
        "en": "an3f - Variable 11 – Fatigue-Strength-Reduction Factors an3f Variable 11 – Fatigue-Strength-Reduction Factors Contents Engineering Your Best Variable 11 – Fatigue-Strength-Reduction Factors Variable 12 – Parameter m Variable 13 – Parameter n Variable list Engineering Your Best Variable 11 – Fatigue-Strength-Reduction Factors Variable 11 – Fatigue-Strength-Reduction Factors Table 5.11 - Weld Surface Fatigue-Strength-Reduction Factors Weld Condition Surface Condition Quality Levels (see Table 5.12) 1 2 3 4 5 6 7 Full penetration Machined 1.0 1.5 1.5 2.0 2.5 3.0 4.0 As-welded 1.2 1.6 1.7 2.0 2.5 3.0 4.0 Partial penetration Final surface machined NA 1.5 1.5 2.0 2.5 3.0 4.0 Final surface as-welded NA 1.6 1.7 2.0 2.5 3.0 4.0 Root NA NA NA NA NA NA 4.0 Fillet Toe machined NA NA 1.5 NA 2.5 3.0 4.0 Toe as-welded NA NA 1.7 NA 2.5 3.0 4.0 Root NA NA NA NA NA NA 4.0 Table 5.12 - Weld Surface Fatigue-Strength-Reduction Factors Fatigue-Strength-Reduction Factor Quality Level Definition 1.0 1 Machined or ground weld that receives a full volumetric examination, and a surface that receives MT/PT examination and a VT examination. 1.2 1 As-welded weld that receives a full volumetric examination, and "
      },
      "help": {
        "de": [
          "/output/an3f/varhelp/variable11faktorzurreduzierungderdauerfestigkeit_de.html"
        ],
        "en": [
          "/output/an3f/varhelp/variable11fatiguestrengthreductionfactors_en.html"
        ]
      }
    },
    {
      "varNr": 12,
      "semanticStatus": "legacy-help-only",
      "label": {
        "de": "an3f - Variable 12 – Parameter m",
        "en": "an3f - Variable 12 – Parameter m"
      },
      "description": {
        "de": "an3f - Variable 12 – Parameter m an3f Variable 12 – Parameter m Navigation Engineering Your Best Variable 11 – Faktor zur Reduzierung der Dauerfestigkeit Variable 12 – Parameter m Variable 13 – Parameter n Variablenliste Engineering Your Best Variable 12 – Parameter m Variable 12 – Parameter m Table 5.13 - Fatigue Penalty Factors For Fatigue Analysis Material K e [Note(1)] T max [Note(2)] m n (°C) (°F) Low alloy steel 2.0 0.2 371 700 Martensitic stainless steel 2.0 0.2 371 700 Carbon steel 3.0 0.2 371 700 Austenitic stainless steel 1.7 0.3 427 800 Nickel-chromium-iron 1.7 0.3 427 800 Nickel-copper 1.7 0.3 427 800 Notes: (1) Fatigue penalty factor (2) The fatigue penalty factor should only be used if all of the following are satisfied • The component is not subject to thermal ratcheting, and • The maximum temperature in the cycle is within the value in the table for the material",
        "en": "an3f - Variable 12 – Parameter m an3f Variable 12 – Parameter m Contents Engineering Your Best Variable 11 – Fatigue-Strength-Reduction Factors Variable 12 – Parameter m Variable 13 – Parameter n Variable list Engineering Your Best Variable 12 – Parameter m Variable 12 – Parameter m Table 5.13 - Fatigue Penalty Factors For Fatigue Analysis Material K e [Note(1)] T max [Note(2)] m n (°C) (°F) Low alloy steel 2.0 0.2 371 700 Martensitic stainless steel 2.0 0.2 371 700 Carbon steel 3.0 0.2 371 700 Austenitic stainless steel 1.7 0.3 427 800 Nickel-chromium-iron 1.7 0.3 427 800 Nickel-copper 1.7 0.3 427 800 Notes: (1) Fatigue penalty factor (2) The fatigue penalty factor should only be used if all of the following are satisfied • The component is not subject to thermal ratcheting, and • The maximum temperature in the cycle is within the value in the table for the material"
      },
      "help": {
        "de": [
          "/output/an3f/varhelp/variable12parameterm_de.html"
        ],
        "en": [
          "/output/an3f/varhelp/variable12parameterm_en.html"
        ]
      }
    },
    {
      "varNr": 13,
      "semanticStatus": "legacy-help-only",
      "label": {
        "de": "an3f - Variable 13 – Parameter n",
        "en": "an3f - Variable 13 – Parameter n"
      },
      "description": {
        "de": "an3f - Variable 13 – Parameter n an3f Variable 13 – Parameter n Navigation Engineering Your Best Variable 11 – Faktor zur Reduzierung der Dauerfestigkeit Variable 12 – Parameter m Variable 13 – Parameter n Variablenliste Engineering Your Best Variable 13 – Parameter n Variable 13 – Parameter n Table 5.13 - Fatigue Penalty Factors For Fatigue Analysis Material K e [Note(1)] T max [Note(2)] m n (°C) (°F) Low alloy steel 2.0 0.2 371 700 Martensitic stainless steel 2.0 0.2 371 700 Carbon steel 3.0 0.2 371 700 Austenitic stainless steel 1.7 0.3 427 800 Nickel-chromium-iron 1.7 0.3 427 800 Nickel-copper 1.7 0.3 427 800 Notes: (3) Fatigue penalty factor (4) The fatigue penalty factor should only be used if all of the following are satisfied • The component is not subject to thermal ratcheting, and • The maximum temperature in the cycle is within the value in the table for the material",
        "en": "an3f - Variable 13 – Parameter n an3f Variable 13 – Parameter n Contents Engineering Your Best Variable 11 – Fatigue-Strength-Reduction Factors Variable 12 – Parameter m Variable 13 – Parameter n Variable list Engineering Your Best Variable 13 – Parameter n Variable 13 – Parameter n Table 5.13 - Fatigue Penalty Factors For Fatigue Analysis Material K e [Note(1)] T max [Note(2)] m n (°C) (°F) Low alloy steel 2.0 0.2 371 700 Martensitic stainless steel 2.0 0.2 371 700 Carbon steel 3.0 0.2 371 700 Austenitic stainless steel 1.7 0.3 427 800 Nickel-chromium-iron 1.7 0.3 427 800 Nickel-copper 1.7 0.3 427 800 Notes: (3) Fatigue penalty factor (4) The fatigue penalty factor should only be used if all of the following are satisfied • The component is not subject to thermal ratcheting, and • The maximum temperature in the cycle is within the value in the table for the material"
      },
      "help": {
        "de": [
          "/output/an3f/varhelp/variable13parametern_de.html"
        ],
        "en": [
          "/output/an3f/varhelp/variable13parametern_en.html"
        ]
      }
    }
  ],
  "mcp": {
    "readBeforeUse": true,
    "workflow": [
      "Read this context and the human module help.",
      "Inspect the live module definition and current values through MCP.",
      "Resolve materials through the material workflow when material selectors are present.",
      "Set only runtime-confirmed input variables; never infer writable state from a legacy help filename.",
      "Calculate, inspect validation messages and read back governing results."
    ],
    "limitations": [
      "This bootstrap context preserves the complete legacy help but does not yet contain a curated semantic variable contract.",
      "Runtime MCP metadata is authoritative when it differs from this legacy snapshot."
    ]
  },
  "migration": {
    "curated": false,
    "target": "Create content/modules/<MODULE>/module.json and bilingual HTML fragments using B1 as the reference.",
    "sourceRepository": "lvs",
    "sourceCommit": "e619f6b1db68045fa49935d6f5f807b9acd1bc1d",
    "catalogConfigurations": [
      {
        "configId": "",
        "displayName": "Annex 3-F",
        "designType": null,
        "defaultBauform": null
      }
    ]
  }
}