rbsa

No.	DIN Description	Material Number	Dynamic Modulus of Elasticity E kN/mm²
High-temperature steels, unalloyed
Temperature °C			-200	-100	0	20	100	200	300	400	500	600	700	800	900	1000
1	St 35.8	1.0305				211	207	200	192	184	175	165
2	St 37.8	1.0315				211	207	200	192	184	175	165
3	St 45.8	1.0405				211	207	200	192	184	175	165
4	St 42.8	1.0498				211	207	200	192	184	175	165
5	P 235 GH	1.0345				211	207	200	192	184	175	165
6	P 265 GH	1.0425				211	207	200	192	184	175	165
High-temperature steels, low-alloyed			Dynamic Modulus of Elasticity E, kN/mm²
Temperature °C			-200	-100	0	20	100	200	300	400	500	600	700	800	900	1000
7	P 295 GH	1.0481				211	207	200	192	184	175	165
8	19 Mn 5	1.0482				211	207	200	192	184	175	165
9	16 Mo 3	1.5415				211	207	200	192	184	175	165
10	16 Mo 5	1.5423				211	207	200	192	184	175	165
11	15 MnNi 6-3	1.6210				211	207	200	192	184	175	165

No.	DIN Description	Material Number	Dynamic Modulus of Elasticity E kN/mm²
12	20 MnMoNi 5-5	1.6310				211	207	200	192	184	175	165
13	15 NiCuMoNb 5-6-4	1.6368				211	207	200	192	184	175	165
14	13 CrMo 4-5	1.7335				211	207	200	192	184	175	165
15	12 CrMo 19-5	1.7362				217	212	205	198	189	180	168
16	10 CrMo 9-10 GS-12 CrMo 9-10	1.7380				214	209	202	195	187	177	167
17	14 MoV 6-3	1.7715				214	209	202	195	187	177	167
High-temperature steels, high-alloyed			Dynamic Modulus of Elasticity E, kN/mm²
Temperature °C			-200	-100	0	20	100	200	300	400	500	600	700	800	900	1000
18	X 10 CrMoVNb 9-1	1.4903				218	213	207	199	190	181	168
19	X 20 CrMoV 11-1	1.4922				218	213	207	199	190	181	168
20	X 8 CrNiMoNb 16-16	1.4981				199	194	187	176	166	158	150	142	133
21	X 12 CrMo 9-1	1.7386				218	213	207	199	190	181	168
Highly heat-resisting steels			Dynamic Modulus of Elasticity E, kN/mm²
Temperature °C			-200	-100	0	20	100	200	300	400	500	600	700	800	900	1000
22	X 3 CrNiMoBN 17-13-3	1.4910				199	194	187	176	166	158	150	142	133
23	X 6 CrNiMoB 17-12-2	1.4919				199	194	187	176	166	158	150	142	133
24	X 6 CrNi 18-10	1.4948				199	194	187	176	166	158	150	142	133
25	X 3 CrNiN 18-11	1.4949				199	194	187	176	166	158	150	142	133
Heat-resistant steels			Dynamic Modulus of Elasticity E, kN/mm²
Temperature °C			-200	-100	0	20	100	200	300	400	500	600	700	800	900	1000
26	X 10 CrAlSi 7	1.4713				218	213	207	199	190	181	168
27	X 18 CrN 28	1.4749
28	X 15 CrNiSi 20-12	1.4828				196	190	182	174	166	158	150	142	134	127	120
29	X 10 NiCrAlTi 32-21	1.4876				194	189	183	177	170	163	156	149	141	134	127
30	X 5 NiCrNbCe 32-27	1.4877

No.	DIN Description	Material Number	Dynamic Modulus of Elasticity E kN/mm²
Stainless and acid-resistant steels			Dynamic Modulus of Elasticity E, kN/mm²
Temperature °C			-200	-100	0	20	100	200	300	400	500	600	700	800	900	1000
31	X 6 Cr 17	1.4016				220
32	X 17 CrNi 16-2	1.4057				216
33	X 5 CrNi 18-10	1.4301				200	194	186	179	172	165
34	X 3 CrTi 17	1.4510				218	213	207	199	190	181	168
35	X 6 CrNiTi 18-10	1.4541				200	194	186	179	172	165
36	X 6 CrNiNb 18-10	1.4550				200	194	186	179	172	165
37	X 6 CrNiMoTi 17-12-2	1.4571				200	194	186	179	172	165
Case-hardened and heat-treated steels			Dynamic Modulus of Elasticity E, kN/mm²
Temperature °C			-200	-100	0	20	100	200	300	400	500	600	700	800	900	1000
38	C 22	1.0402				211	207	200	192	184	175	165
39	C 45 E	1.1191				211	207	200	192	184	175	165
Fine grain and low-temperature steels			Dynamic Modulus of Elasticity E, kN/mm²
Temperature °C			-200	-100	0	20	100	200	300	400	500	600	700	800	900	1000
40	St E 255	1.0461				212	207	200	193	185	176
41	P 460 N	1.8905				210	205	198	191	183	173
42	13 MnNi 6-3	1.6217
Aluminium alloys			Dynamic Modulus of Elasticity E, kN/mm²
Temperature °C			-200	-100	0	20	100	200	300	400	500	600	700	800	900	1000
43	EN AW-Al 99,0	EN AW-1200	(77)	(73)	69,5		(66)	(58)	(47)
44	EN AW-AlMn 1 Cu	EN AW-3003	76	72,7	69,5		65,5	(57,9)	(46,9)
45	EN AW-AlMg 2,5	EN AW-5052	77	73,8	71		66,9	55,8	(42,7)
46	EN AW-AlMg 4,5 Mn 0,7	EN AW-5083	78	74,8	71,4		68,6	60,7	(50,3)
47	EN AW-AlMg 1 SiCu	EN AW-6061	76	72,4	69,6		65,8	60,3	(52,4)
48	EN AW-AlMg 1 Si	EN AW-6060	(76)	(72,4)	69,6		65,8	57,9	(48,3)

No.	DIN Description	Material Number	Dynamic Modulus of Elasticity E kN/mm²
Copper alloys			Dynamic Modulus of Elasticity E, kN/mm²
Temperature °C			-200	-100	0	20	100	200	300	400	500	600	700	800	900	1000
49	CuNi 10 Fe 1 Mn	CW 352 H	134	129	124		118	112	106	100
50	CuNi 30 Mn 1 Fe	CW 354 H	159	156	153		(148)	(143)	(137)	(130)	(121)
51	CuZn 39 Pb 3 (Ms 58)	CW 614 N			111		108	104	99
52	CuZn 39 Pb 0.5 (Ms 60 Pb)	CW 610 N			(109)		96	83	(69)
53	CuZn 28 Sn 1 As (50 Ms 71)	CW 706 R		112	110		107	94	79	59
54	CuZn 38 Sn 1 (50 Ms 60)	CW 717 R	103	101	97		94	90	85	79	(71)
55	CuZn 20 Al 2 As (50 Ms 76)	CW 702 R		(112)	110		(107)	(94)	(79)	(59)
56	CuSn 4 (Phosphor bronze)	CW 450 K	115	114	109		103	94	83	67
57	CuAl 8 Fe 3 (Aluminium bronze)	CW 303 G	112	112	109		(103)	(94)	(83)	(67)
Nickel alloys			Dynamic Modulus of Elasticity E, kN/mm²
Temperature °C			-200	-100	0	20	100	200	300	400	500	600	700	800	900	1000
58	Ni 99,2	2.4066		(217)	(214)		210	207	203	198	190	182	174	163	141
59	NiCu 30 Fe	2.4360		(179)	(179)		179	177	171	152	123	98	(81)
60	NiCr 15 Fe	2.4816		(228)	(220)		212	207	202	196	188	181	172	163	152
61	NiCr 21 Mo	2.4858		(203)	(197)		192	187	181	174	168	162	154	146	131
62	NiCr 22 Mo 9 Nb	2.4856		(210)	(207)		203	199	193	187	181	174	167	157	145
63	NiMo 16 Cr 15 W	2.4819		(212)	(207)		201	195	190	184	178	(172)	(167)	(161)	(155)
64	NiMo 16 Cr 16 Ti	2.4610		(219)	(214)		208	202	196	190	183	176	169	160	150
65	NiMo 28	2.4617		(222)	(217)		213	208	203	197	191	185	(179)	(172)	(165)

No.	DIN Description	Material Number	Dynamic Modulus of Elasticity E kN/mm²
Other materials			Dynamic Modulus of Elasticity E, kN/mm²
Temperature °C			-200	-100	0	20	100	200	300	400	500	600	700	800	900	1000
66	Ni 36	1.3912			130		135	141	143	141	(136)
67	TiAl 6 V 4	3.7165			108		103	97	91	85	80	(75)
68	EN-GJS-415	EN-JS 1030			159		155,5	151	145,3	139,7	133,9
69	GG (w. lamell. graphite)				127,8		125,7	122,8	119,9	116,8	113,2

ã Springer-Verlag Berlin Heidelberg 11th Edition

No.	DIN Description	Material Number
Temperature resistant steels, unalloyed			Poisson’s ratio
Temperature °C			-200	-100	0	20	100	200	300	400	500	600	700	800	900	1000
1	St 35.8	1.0305				0,28	0,28	0,29	0,29	0,30	0,30	0,31
2	St 37.8	1.0315				0,28	0,28	0,29	0,29	0,30	0,30	0,31
3	St 45.8	1.0405				0,28	0,28	0,29	0,29	0,30	0,30	0,31
4	St 42.8	1.0498				0,28	0,28	0,29	0,29	0,30	0,30	0,31
5	P 235 GH	1.0345				0,28	0,28	0,29	0,29	0,30	0,30	0,31
6	P 265 GH	1.0425				0,28	0,28	0,29	0,29	0,30	0,30	0,31
Temperature resistant steels, low-alloyed			Poisson’s ratio
Temperature °C			-200	-100	0	20	100	200	300	400	500	600	700	800	900	1000
7	P 295 GH	1.0481				0,28	0,28	0,29	0,29	0,30	0,30	0,31
8	19 Mn 5	1.0482				0,28	0,28	0,29	0,29	0,30	0,30	0,31
9	16 Mo 3	1.5415				0,28	0,28	0,29	0,29	0,30	0,30	0,31
10	16 Mo 5	1.5423				0,28	0,28	0,29	0,29	0,30	0,30	0,31
11	15 MnNi 6-3	1.6210				0,28	0,28	0,29	0,29	0,30	0,30	0,31
12	20 MnMoNi 5-5	1.6310				0,28	0,28	0,29	0,29	0,30	0,30	0,31
13	15 NiCuMoNb 5-6-4	1.6368				0,28	0,28	0,29	0,29	0,30	0,30	0,31
14	13 CrMo 4-5	1.7335				0,28	0,28	0,29	0,29	0,30	0,30	0,31
15	12 CrMo 19-5	1.7362				0,28	0,28	0,29	0,29	0,30	0,30	0,31
16	10 CrMo 9-10 GS-12 CrMo 9-10	1.7380				0,28	0,28	0,29	0,29	0,30	0,30	0,31
17	14 MoV 6-3	1.7715				0,28	0,28	0,29	0,29	0,30	0,30	0,31

No.	DIN Description	Material Number
Temperature resistant steels, highly-alloyed				Poisson’s ratio
Temperature °C				-200	-100	0	20	100	200	300	400	500	600	700	800	900	1000
18	X 10 CrMoVNb 9-1		1.4903				0,28	0,28	0,29	0,29	0,30	0,30	0,31
19	X 20 CrMoV 11-1		1.4922				0,28	0,28	0,29	0,29	0,30	0,30	0,31
20	X 8 CrNiMoNb 16-16		1.4981				0,28	0,28	0,29	0,29	0,30	0,30	0,31
21	X 12 CrMo 9-1		1.7386				0,28	0,28	0,29	0,29	0,30	0,30	0,31
High temperature resistant steels				Poisson’s ratio
Temperature °C				-200	-100	0	20	100	200	300	400	500	600	700	800	900	1000
22	X 3 CrNiMoBN 17-13-3		1.4910				0,28	0,28	0,29	0,29	0,30	0,30	0,31
23	X 6 CrNiMoB 17-12-2		1.4919				0,28	0,28	0,29	0,29	0,30	0,30	0,31
24	X 6 CrNi 18-10		1.4948				0,28	0,28	0,29	0,29	0,30	0,30	0,31
25	X 3 CrNiN 18-11		1.4949				0,28	0,28	0,29	0,29	0,30	0,30	0,31
Heat-resisting steels				Poisson’s ratio
Temperature °C				-200	-100	0	20	100	200	300	400	500	600	700	800	900	1000
26	X 10 CrAlSi 7		1.4713				0,28	0,28	0,29	0,29	0,30	0,30	0,31
27	X 18 CrN 28		1.4749				0,28	0,28	0,29	0,29	0,30	0,30	0,31
28	X 15 CrNiSi 20-12		1.4828				0,28	0,28	0,29	0,29	0,30	0,30	0,31
29	X 10 NiCrAlTi 32-21		1.4876				0,28	0,28	0,29	0,29	0,30	0,30	0,31
30	X 5 NiCrNbCe 32-27		1.4877				0,28	0,28	0,29	0,29	0,30	0,30	0,31
Stainless and acid-resistant steels				Poisson’s ratio
Temperature °C				-200	-100	0	20	100	200	300	400	500	600	700	800	900	1000
31	X 6 Cr 17		1.4016				0,28	0,28	0,29	0,29	0,30	0,30	0,31
32	X 17 CrNi 16-2		1.4057				0,28	0,28	0,29	0,29	0,30	0,30	0,31
33	X 5 CrNi 18-10		1.4301				0,28	0,28	0,29	0,29	0,30	0,30	0,31
34	X 3 CrTi 17		1.4510				0,28	0,28	0,29	0,29	0,30	0,30	0,31
35	X 6 CrNiTi 18-10		1.4541				0,28	0,28	0,29	0,29	0,30	0,30	0,31
36	X 6 CrNiNb 18-10		1.4550				0,28	0,28	0,29	0,29	0,30	0,30	0,31
37	X 6 CrNiMoTi 17-12-2		1.4571				0,28	0,28	0,29	0,29	0,30	0,30	0,31

No.	DIN Description	Material Number
Case hardening and heat treatable steels			Poisson’s ratio
Temperature °C			-200	-100	0	20	100	200	300	400	500	600	700	800	900	1000
38	C 22	1.0402				0,28	0,28	0,29	0,29	0,30	0,30	0,31
39	C 45 E	1.1191				0,28	0,28	0,29	0,29	0,30	0,30	0,31
Fine-grained structural and low- temperature steels			Poisson’s ratio
Temperature °C			-200	-100	0	20	100	200	300	400	500	600	700	800	900	1000
40	St E 255	1.0461				0,28	0,28	0,29	0,29	0,30	0,30	0,31
41	P 460 N	1.8905				0,28	0,28	0,29	0,29	0,30	0,30	0,31
42	13 MnNi 6-3	1.6217				0,28	0,28	0,29	0,29	0,30	0,30	0,31
Copper alloys			Poisson’s ratio
Temperature °C			-200	-100	0	20	100	200	300	400	500	600	700	800	900	1000
49	CuNi 10 Fe 1 Mn	CW 352 H				0,35	0,36	0,36	0,36
50	CuNi 30 Mn 1 Fe	CW 354 H				0,33	0,33	0,33	0,33
51	CuZn 39 Pb 3 (Ms 58)	CW 614 N				0,41	0,41	0,41	0,38
Other materials			Poisson’s ratio
Temperature °C			-200	-100	0	20	100	200	300	400	500	600	700	800	900	1000
66	Ni 36	1.3912				0,28	0,29	0,27	0,28	0,27	0,28
67	TiAl 6 V 4	3.7165				0,26	0,26	0,26	0,26	0,26	0,26
68	EN-GJS-415	EN-JS 1030				0,27	0,27	0,28	0,28	0,28	0,29
69	GG (m. Lamellar graphitet)					0,26	0,26	0,26	0,26	0,27	0,27

ã Springer-Verlag Berlin Heidelberg 11th Edition

No.	Material Number	Temperature in °C
		-200	-100	0	100	200	300	400	500	600	700	800	900	1000
1 - 4; 7 -10; 13; 14; 16; 17	1.0305; 1.0315; 1.0405; 1.0498; 1.0481; 1.0482; 1.5415; 1.5423; 1.6368; 1.7335; 1.7380; 1.7715
1 - 4; 7 -10; 13; 14; 16; 17					12.2	12.9	13.4	14	14.3	14.6
5; 6;	1.0345; 1.0445
11; 12	1.6210; 1.6310				12.3	12.8	13.3	13.8	14.2
15	1.7362				11.4	12	12.4	12.8	13.2	13.4
18; 19	1.4903; 1.4922				10.9	11.3	11.7	12	12.3	12.6
20; 22 - 25	1.4981; 1.4910; 1.4919; 1.4948; 1.4949
20; 22 - 25	1.4981; 1.4910; 1.4919; 1.4948; 1.4949				16.3	16.9	17.3	17.8	18.2	18.4	18.7	19
21	1.7386				11.2	11.6	12	12.3	12.6	12.9
26	1.4713				11.3	11.8	12.3	12.7	13	13.2
27	1.4749							11				12.5		14
28; 35 36	1.4828; 1.4541; 1.4550
28; 35 36	1.4828; 1.4541; 1.4550				16.7	17.2	17.7	18.1	18.4	18.8	19.1	19.4	19.7	20
29	1.4876				15.1	15.7	16.2	16.6	17	17.4	17.7	18	18.3	18.6
30	1.4877							16.2				17.7		18.4
31	1.4016				10	10	10.5	10.5	11
32	1.4057				10	10.5	11	11	11
33	1.4301				16.7	17.2	17.7	18.1	18.4	18.8	19.1	19.4
34	1.4510				10.3	10.8	11.2	11.6	11.9	12.1	12.4	12.9
37	1.4571				16.5	17.5	18.5	18.5	19
38; 39	1.0402; 1.1191				12.5	13.2	13.7	14.2	14.6	14.9
40; 41	1.0461; 1.8905				12	13	13	14	14

No.	Material Number	Temperature in °C
		-200	-100	0	100	200	300	400	500	600	700	800	900	1000

	(No.42 see end of table)

43	EN AW-1200	20.5	21.5	22.5	23.5	24.5	25.4
44	EN AW-3003		(21.2)	(22.2)	23.2	24.1	(25.1)
45	EN AW-5052		(21.7)	(22.7)	23.8	24.8	(25.7)
46	EN AW-5083		(22.1)	(23.0)	24.0	25.0	(25.9)
47	EN AW-6061		(21.3)	(22.3)	23.3	24.3	(25.2)

48	EN AW-6060		(21.4)	(22.4)	23.4	24.4	(25.4)
49	CW 352 H				16.4	16.8	17.1	17.5	17.9	18.4	19	19.6	20.1
50	CW 354 H				15.4	15.9	16.3	16.7	17.1	17.6	18.1	18.6	19.1
51	CW 614 N			(19.3)	19.6	20.2	21.1
52	CW 610 N			18.8	19.8	20.6	21.6	(22.4)
53	CW 706 R		(19.4)	(19.6)	19.8	20	20.2	(20.3)
54	CW 717 R		18	18.9	19.8	20.7	21.6	22.5	23.4	24.3
55	CW 702 R		(15.8)	(17.0)	18	19	20	(21)
56	CW 450 K		(11.3)	(14.2)	16.2	17.1	18	(18.9)
57	CW 303 G		(14.8)	(15.3)	15.8	16.4	16.9	(17.4)
58	2.4066	9.3	10.9	12.2	13.3	13.8	14.3	14.8	15.2	15.5	15.8	16.1	(16.4)
59	2.4360	10.9	12	13.1	14.1	15.5	15.8	15.9	16.2	16.6	16.9	17.4	(17.7)
60	2.4816	(11.3)	11.9	12.5	13	13.6	14.1	14.5	14.9	15.3	15.7	16.1	(16.5)
61	2.4858		(12.0)	(13.0)	14	14.8	15.1	15.5	15.7	16.3	16.8	17.3	17.7
62	2.4856	9.5	11.3	12.2	12.8	13.1	13.3	13.6	14	14.5	15	15.5	16.1
63	2.4819		(9.9)	(10.7)	11.3	12	12.7	13.1	13.3	13.8	14.4	15	15.7
64	2.4610		(8.9)	(9.9)	10.8	11.8	12.5	13	13	13.4	13.5	14.5	15.1
65	2.4617		(9.5)	9.9	10.4	10.8	11.2	11.4	11.7	(11.9)	(12.0)	(12.1)	(12.2)

No.	Material Number	Temperature in °C
		-200	-100	0	100	200	300	400	500	600	700	800	900	1000
66	1.3912			(1.8)	2.2	3.3	6.2	8.7
67	3.7165			(8.7)	9.2	9.5	9.7	9.9	10.3
68	EN-JS 1030			(12.0)	12.4	12.8	13.2	13.5
69	(GG)			(11.6)	12	12.4	12.7	13	13.3


		-190	-150	-100	- 50	- 25
42	1.6217	9	10	11	11	12

Density r [kg/m³] at 20 °C

No.	DIN Description	Material number	Density r [kg/m³]
High temperature steels, unalloyed
1	St 35.8	1.0305	7850
2	St 37.8	1.0315	7850
3	St 45.8	1.0405	7850
4	St 42.8	1.0498	7850
5	P 235 GH	1.0345	7800
6	P 265 GH	1.0425	7800
High temperature steels, low-alloyed
7	P 295 GH	1.0481	7830
8	19 Mn 5	1.0482	7830
9	16 Mo 3	1.5415	7850
10	16 Mo 5	1.5423	7850
11	15 MnNi 6-3	1.6210	7840
12	20 MnMoNi 5-5	1.6310	7850
13	15 NiCuMoNb 5-6-4	1.6368	7850
14	13 CrMo 4-5	1.7335	7850
15	12 CrMo 19-5	1.7362	7770
16	10 CrMo 9-10 GS-12 CrMo 9-10	1.7380	7800
17	14 MoV 6-3	1.7715	7840
High temperature steels, high-alloyed
18	X 10 CrMoVNb 9-1	1.4903	7770
19	X 20 CrMoV 11-1	1.4922	7750
20	X 8 CrNiMoNb 16-16	1.4981	8010
21	X 12 CrMo 9-1	1.7386	7770

No.	DIN Description	Material number	Density r [kg/m³]
Highly heat resisting steels
22	X 3 CrNiMoBN 17-13-3	1.4910	7890
23	X 6 CrNiMoB 17-12-2	1.4919	7980
24	X 6 CrNi 18-10	1.4948	7900
25	X 3 CrNiN 18-11	1.4949	7930
Heat-resistant steels
26	X 10 CrAlSi 7	1.4713	7700
27	X 18 CrN 28	1.4749	7700
28	X 15 CrNiSi 20-12	1.4828	7900
29	X 10 NiCrAlTi 32-21	1.4876	8000
30	X 5 NiCrNbCe 32-27	1.4877	8000
Stainless and acid-resistant steels
31	X 6 Cr 17	1.4016	7700
32	X 17 CrNi 16-2	1.4057	7700
33	X 5 CrNi 18-10	1.4301	7900
34	X 3 CrTi 17	1.4510	7700
35	X 6 CrNiTi 18-10	1.4541	7900
36	X 6 CrNiNb 18-10	1.4550	7900
37	X 6 CrNiMoTi 17-12-2	1.4571	7980
Case-hardened and heat-treated steels
38	C 22	1.0402	7850
39	C 45 E	1.1191	7850
Fine-grain and low-temperature steels
40	St E 255	1.0461	7850
41	P 460 N	1.8905	7850
42	13 MnNi 6-3	1.6217	7850
Aluminum alloys
43	EN AW-Al 99,0	EN AW-1200	2710
44	EN AW-AlMn 1 Cu	EN AW-3003	2730
45	EN AW-AlMg 2,5	EN AW-5052	2680
46	EN AW-AlMg 4,5 Mn 0,7	EN AW-5083	2660
47	EN AW-AlMg 1 SiCu	EN AW-6061	2700
48	EN AW-AlMg 1 Si	EN AW-6060	2700

No.	DIN Description	Material number	Density r [kg/m³]
Copper alloys
49	CuNi 10 Fe 1 Mn	CW 352 H	8900
50	CuNi 30 Mn 1 Fe	CW 354 H	8900
51	CuZn 39 Pb 3 (Ms 58)	CW 614 N	8470
52	CuZn 39 Pb 0.5 (Ms 60 Pb)	CW 610 N	8400
53	CuZn 28 Sn 1 As (50 Ms 71)	CW 706 R	8560
54	CuZn 38 Sn 1 (50 Ms 60)	CW 717 R	8350
55	CuZn 20 Al 2 As (50 Ms 76)	CW 702 R	8330
56	CuSn 4 (Phosphor bronze)	CW 450 K	8900
57	CuAl 8 Fe 3 (Aluminum bronze)	CW 303 G	7700
Nickel alloys
58	Ni 99,2	2.4066	8900
59	NiCu 30 Fe	2.4360	8800
60	NiCr 15 Fe	2.4816	8430
61	NiCr 21 Mo	2.4858	8100
62	NiCr 22 Mo 9 Nb	2.4856	8400
63	NiMo 16 Cr 15 W	2.4819	8900
64	NiMo 16 Cr 16 Ti	2.4610	8600
65	NiMo 28	2.4617	9200
Other materials
66	Ni 36	1.3912	8200
67	TiAl 6 V 4	3.7165	4430
68	EN-GJS-415	EN-JS 1030	7100
69	GG (Lamellar graphite)		7080

ã Springer-Verlag Berlin Heidelberg 2013

s. Dynamic modulus of elasticity

s. Material density

s. Average linear thermal expansion coefficient β between 20°C and the temperature γ in 10^-6/K

s. Dynamic modulus of elasticity

s. Material density

s. Average linear thermal expansion coefficient β between 20°C and the temperature γ in 10^-6/K

s. Poisson’s ratio ν

ATTENTION: A vibration analysis can only be performed, after you have entered this value! Only then, the program can switch to the WTS module.

This distance is not considered for the calculation of the straight tube length in WTS/VERD.

On this page

Dynamic modulus of elasticity

Poisson’s ratio ν

Average linear thermal expansion coefficient β between 20°C and the temperature γ in 10-6/K

Material density

Variables

Variable 6 – Modulus of elasticity of tube material

Variable 7 – Density of tube material

Variable 66 – Linear coefficient of thermal expansion of tube

Variable 67 – Modulus of elasticity of shell material

Variable 68 – Density of shell material

Variable 69 – Linear coefficient of thermal expansion of shell

Variable 70 – Poisson’s ratio of tube material

Variable 71– Poisson’s ratio of shell material

Variable 73 – Distance from baffle to U-bend